VEHICLE AFTERCARE
YOUR NEW WRAP LOOKS THE BUSINESS.
LET'S KEEP IT THAT WAY.
You've invested in getting your vehicle looking the part. Now it's time to give those fresh graphics a little TLC.
Whether you've had a full vehicle wrap, partial wrap, printed graphics or cut vinyl lettering installed, a little regular maintenance goes a long way towards keeping it looking sharp.
Follow our aftercare guide to help protect your investment and get the most out of your new graphics.
THE FIRST FEW DAYS
Freshly installed graphics need a little time to settle in. We recommend:
-
Avoid washing your vehicle for at least 72 hours following installation.
-
Where possible, allow the vehicle to remain in a sheltered area.
-
Avoid picking, pulling or rubbing the edges of the vinyl.
-
Don't attempt to reposition or repair any lifting areas yourself.
Depending on the material, installation conditions and weather, additional settling time may be required.
If you notice anything unusual, give us a call before attempting to fix it.
WASHING YOUR VEHICLE
A little elbow grease goes a long way. Hand washing is our preferred method for keeping vehicle graphics in good condition. We recommend:
-
Rinse the vehicle first to remove loose dirt and grit.
-
Use a mild, pH-neutral vehicle wash solution.
-
Wash using a soft sponge or microfibre cloth.
-
Avoid abrasive brushes, scourers and rough cleaning materials.
-
Rinse thoroughly with clean water.
-
Dry with a clean microfibre cloth to minimise water spotting.
Think of it as a spa day for your vehicle. It deserves it!
PRESSURE WASHERS & CAR WASHES
Easy does it! High-pressure water can force its way underneath vinyl edges and cause lifting or damage.
We recommend avoiding pressure washing wherever possible. If you do use a pressure washer:
-
Keep the pressure below 1,200 PSI.
-
Use a wide spray nozzle (40 degrees or wider).
-
Keep the nozzle at least 300mm away from the graphics.
-
Keep the nozzle perpendicular to the surface.
-
Never direct high-pressure water towards vinyl edges, seams or joins.
Automatic brush car washes are also best avoided. The brushes can scratch the surface, dull the finish and catch the edges of your graphics. If you need to use an automatic car wash, choose a touchless option.
CLEANING PRODUCTS
Not everything that cleans your car is good for your wrap. Avoid using:
-
Harsh chemicals and solvents.
-
Abrasive cleaning products.
-
Strong degreasers.
-
Household cleaning detergents.
-
Abrasive polishes and compounds.
-
Products containing petroleum distillates unless specifically approved for your film.
Always use cleaning products designed for vehicle graphics or wraps. If you're unsure whether a product is suitable, check with us before applying it.
BIRD DROPPINGS, TREE SAP & FUEL SPILLS
Don't leave the nasty stuff sitting there! Bird droppings, tree sap, insect residue and fuel spills can damage vinyl if left untreated. We recommend:
-
Remove contaminants as soon as possible.
-
Soften stubborn deposits using warm, soapy water.
-
Use a soft microfibre cloth.
-
Never scrape or aggressively scrub the surface.
-
Wipe away fuel spills immediately.
The longer contaminants sit on the vinyl, the harder they can be to remove.
PARKING & GENERAL CARE
A little protection makes a big difference. Where possible:
-
Park undercover or in the shade.
-
Avoid prolonged exposure to direct sunlight.
-
Keep your vehicle clean and free from contaminants.
-
Regularly check around the edges and joins of your graphics.
-
Avoid allowing dirt and grime to build up.
Like your vehicle's paintwork, vinyl graphics will naturally be affected by UV exposure and environmental conditions over time.
SOMETHING NOT LOOKING RIGHT?
If you notice lifting edges, bubbling, damage or unusual changes to the vinyl, get in touch with us.
Don't try to glue, cut or repair the graphics yourself. A quick assessment by our team can help prevent a small issue from turning into a bigger one.
LOOK AFTER YOUR WRAP. IT'LL LOOK AFTER YOUR BRAND.
Your vehicle is a moving billboard for your business. Keep it clean, keep it looking sharp and let it do its job.
Need a hand with anything? We've got a grip on it.
